This knowledge base will provide the correct firmware updates needed for your Direct-to-Film printer.
Firmware Update (2 MB) (01/2023) – LATEST VERSION
- Update circulation voltage (24v increased cycling)
- Increased ink circulation run-time from 3.5 hours intervals to 2-hour intervals
The white ink line was not circulating sufficiently to remove air in the line during the initial installation/Run-time intervals were spaced too far apart for adequate agitation parameters to be reached.
Insufficient voltage/Motherboard settings related to the amount of white ink circulated were insufficient
Upgraded voltage to allow for increased white ink circulation/Updated run-time intervals to allow for sufficient agitation parameters to be reached.
Older VJ-628D Firmware Updates
Firmware Update (2 MB) (08/2022)